明确应用工况
整理介质、压力、温度、速度与使用环境等基础条件。
产品系列
Pneumatic Cylinder Model:DC7
Series DC7 heavy duty steel pneumatic cylinders offer advanced features like the strong scraper gland assembly, case hardened piston rods and high strength tie rods with rolled threads.
SERIES OVERVIEW
Pneumatic Cylinder Model:DC7
Series DC7 heavy duty steel pneumatic cylinders offer advanced features like the strong scraper gland assembly, case hardened piston rods and high strength tie rods with rolled threads.
- 系列编号
- —
- 所属技术
- 液压技术
- 产品记录
- 8
- 图片与资料
- 1
系列介绍
产品能力与选型说明
The DC7 series is a pneumatic cylinder. A newly developed cushion mechanism has been adopted to improve cushioning characteristics. We also have inner diameters from φ40 to φ150. The switch set is equipped with a magnetic proximity switch. Standardized with a powerful scraper. Markets: ・General Industry ・Factory Automation ・Steel Mill ・Transportation ・Machine Tool ・Construction Applications: ・General industry ・Printing machine ・Steelworks machine ・Forging machine ・Factory Automation ・Conveyance Features/Benefits: ・Floating cushion packing is used to improve cushioning characteristics. ・The cushion needle was modified to enable fine adjustments and improve the operability. ・No refueling required. ・Standardized as H type with a strong scraper that can be used even under dust. ・There is also a specification equipped with a magnetic proximity switch.
SELECTION PATH
从工况到型号，一步步缩小选择范围
结合现场参数、安装边界和交付要求，确认适合的系列与型号。
确认安装边界
核对空间、接口、连接方式与现有系统的兼容性。
匹配技术参数
结合性能、材料、寿命与合规要求进行综合比较。
确认型号与交付
核对完整型号、数量、资料和交期，形成可执行方案。
技术参数
关键规格一览
孔径φ40,φ50,φ63,φ80,φ100,φ125,φ150 mm
与流体类型共同使用Air
润滑剂Unnecessary Once lubricating the cylinder,you must lubricate it constantly.
额定压力0.05 to 1MPa MPa
可承受压力1.5MPa MPa
运行速度50 to 500mm/s mm/sec
工作温度-10 to +60℃(No freezing) °C
缓冲类型With cushions on both ends
缓冲冲程长度φ40 to φ63:20mm φ80,φ100:25mm φ125,φ150:35mm (Cushion ring length), 25 mm (φ80,φ100), 35 mm (φ125,φ150) (Cushion ring length)
螺纹公差JIS 6g/6H
冲程公差1 to 250mm:0 to +1.0 251 to 1000mm:0 to +1.5 1001 to 1500mm:0 to +2.0, 0 to +1.5 mm (251 to 1000 mm), 0 to +2.0 mm (1001 to 1500 mm)
安装类型SD,LB,FA,FB,CA,CB,TC, LB, FA, FB, CA, CB, TC
杆端类型Rod eye(T-end),Rod clevis(Y-end)with pin, Rod Clevis (Y-end) with Pin
波纹管材料Standard:Nylon tarpaulin, Semi-standard:Chloroprene,Conex, Chloroprene, Conex (Semi-standard)
具体产品
型号与订货号
共 8 条产品记录。独立型号尚未确认的产品可按订货号查询。
产品资料
图片、文档与 CAD
共 1 项资料。已归档文件可直接打开；仅有官网入口的资料会标注“官网链接”。
工程资源
样本、CAD 与选型支持
下载已发布资料，或联系应用工程师获取完整配置建议。
Pneumatic Cylinder Model:DC7