01
Sipiol® WL 1120-23 Coating
Sipiol® WL 1120-23 coating is a smooth, aqueous, single-component, anti-friction coating designed specifically for in-line application during production of automotive sealing systems.
产品技术
密封技术
通过材料科学、型面设计和应用工程，为温度、压力、介质与摩擦挑战提供可靠密封。
S
技术概览
适用于严苛环境的工程材料
通过材料科学、型面设计和应用工程，为温度、压力、介质与摩擦挑战提供可靠密封。
产品系列
覆盖关键系统环节
02
Sipiol® WL 1620-21 G Coating
Sipiol® WL 1620-21 G coating is an aqueous, single-component, transparent glossy anti-friction coating used for in-line application during production of colored elastomers, such as o-rings.
03
Sipiol® WL 2010-23/WV 21 F Coating
Sipiol® WL 2010-23/WV 21 F coating is a smooth, aqueous, two-component anti-friction coating designed specifically for off-line application during production of automotive sealing systems. Addition of Sipiol WV 21 F curative is required.
04
Sipiol® WL 2010-24/WV 21 F Coating
Sipiol® WL 2010-24/WV 21 F coating is a smooth, aqueous, two-component anti-friction coating designed specifically for off-line application during production of automotive sealing systems. Addition of Sipiol WV 21 F curative is required.
05
Sipiol® WL 2015-22P/WV 21 F Coating
Sipiol® WL 2015-22P/WV 21 F coating is an aqueous, two-component, anti-friction coating designed specifically for off-line application during production of automotive sealing systems. It is a high abrasion-resistant coating with a structured surface.
06
Sipiol® WP 8556 Primer
Sipiol® WP 8556 aqueous, heat-activated primer is designed for use under Sipiol and Autoseal anti-friction coatings to improve adhesion to extruded and cured EPDM profiles. Primer is compatible with coatings based on acrylics and polyurethanes.
07
LORD JMC-700K Protection Coating
LORD® JMC-700K coating is a thermal-cure epoxy resin specially designed for thin film coating of heat sinks and magnets and provides electrical insulation, heat resistance, and oil resistance with a single coat application.
08
Sipiol UV E1014790 Red Coating
Sipiol® UV E1014790 Red coating is a single-component, flexible, dielectric coating that cures in seconds. Provides comparable dielectric protection as PET film with minimal risk of delamination from the substrate.
09
Sipiol® WL 1025-21 (PF) Coating
Sipiol® WL 1025-21 (PF) coating is an aqueous, single-component, anti-friction coating designed for in-line application during production of automotive sealing systems. It is a high abrasion-resistant coating with a structured surface.
10
Sipiol® WL 1025-21 Coating
Note: This product is no longer available - please contact us for further assistance.
11
CoolTherm® EP-343 Thermally Conductive Epoxy Conformal Coating
CoolTherm® EP-343 coating is a two-component, dielectric epoxy coating recommended for coating printed circuit boards, semiconductors & heat sink assemblies. It efficiently distributes heat from the circuits throughout the coated surface of the board.
12
LORD® 2232 Silver Conductive Coating
LORD® 2232 silver conductive coating is designed for use as a conductive electrode solder base for tantalum capacitors. It can also be used as general-purpose conductive coating for printed circuit board repair & electromagnetic shielding applications.
典型应用
为复杂工况而设计
从元件选型到系统集成，围绕压力、温度、介质、环境和生命周期目标优化方案。
✓航空航天
✓油气与化工
✓生命科学
✓工业设备
需要更具体的配置建议？